GOLD Foundation with ITB λRTQ = 0,033 W/mK
It's a white-Orange produced with selected raw material containing Orange protective filter to meet the requirements of modern thermal insulation used in extreme conditions, where the product is in direct contact with the water, over a long period of time in conjunction with a change in temperature. Plates can also have direct contact with the ground and do not require additional security.
The album takes the average mechanical load, not exceeding:
-2% and is q0, 2 = 24 kN/m2 (2400 kg/m2).
-3% and is q0, 2 = 36 kN/m2 (3600 kg/m2)
λdeklarowany = 0,035 W/mK
λobliczeniowy = 0.040 W/mK
ITB λRTQ = 0,033 W/mK
-compressive stress at 10% deformation relative CS (10): ≥ 120 kPa
-bending strength (BS): ≥ 170 kPa
-water absorption by long-term total immersion WL (T): ≤ 3%
-reaction to fire class: E
-dimension plates, length/width: 1000/500 mm
-edge: a simple, top-edge cutter
-thickness: 10 mm, then every 10 mm according to individual wishes.
CERTIFICATES AND CERTIFIED:
-PN-EN 13163: 2009
-Certificate of conformity with the ITB-0851/
-Technical Recommendations and the quality Institute of TechnologyConstruction RTQ ITB-1261/2013
Styrofoam plates should be used in accordance with the recommendation of the manufacturer and the Technical Recommendations and quality RTQ ITB 1261/2013 and the guidelines contained in the building project.
For sticking of should be used:
-below ground: adhesive-KPS or glue for styrofoam TO-KS, but without mechanical connectors
-above ground level: a polyurethane adhesive-adhesive for THIS styrofoam or SPC-KS, connectors, mechanical.
To use THIS universal adhesive layer reinforced coats-KU or universal adhesive white-KUB and mesh IT-or S145-S170 (glue and the grid just above the ground).
Below ground level, we recommend that you cover with foil plates kubełkową or allowed to come into contact with insulation with polystyrene.
No customer comments for the moment.
No carriers available for this product.
More about the GDC (General Deliveries Conditions) here